2 10′ X 16′ Heavy Duty White Tarps Protect Garden Boat Pool Tarpaulin Ate Tools
- Specifications 10 mils thick. Industrial strength. Double reinforce with plastic corner and grommets approximately every 18 inches for added strength. Heavy duty.
Subosi G108 6-led Garden Pool Aquarium Underwater Boat Lighting Perfectly Sealed Waterproof Ip68 Submersible Flood
- Attention package included only a lamp, power supply is not included and this lamp just compatible with dc12v power supply, wattage at least 30w, please be caution to choose this one. Equipped with 6 high power led as the lamp’s light source, which is ultra-bright as well as energy-efficient & environmental protection, can be applied as accent light. Ip68 waterproof rated, super waterproof and only designed to be used below the water line, please do not use this led underwater boat lamp when out of water. Low voltage for safe use, dc12v is totally safe for illumination in fountain, garden, pool(especially swimming pool), aquarium, pond, rock gardens, fish tank etc. The lamp body size diameter 4 inches(10cm), height 24 inches(6cm), cable length 65feet( or 2meters), lifespan long over 30000 hours.
Dunn Rite Jet Net Boat Pool Skimmer with Remote Control
- Great for pools or ponds. Remote controlled leaf and bag skimmer. Jet net is battery powered by a heavy duty rechargeable ni-mh battery (battery and charger included). Simply lift the skimmer net from the boat to clean and reinstall for more cleaning. This speedy boat tools around your pool and picks up leaves, bugs, seeds and anything else on the surface and captures it in the enclosed net. Jet net operates up to 5-hour before recharging and will operate up to 100-feet from the rc controller. Your kids will love to clean the pool with jet net.
24″ (H) x 13″ (W) Aluminum Handrail w/ Flate Base Plate – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Thickness ¼” thick. This handrail is made by marine fiberglass direct and it uses a solid aluminum base plate that is ¼” thick. Base solid aluminum base plate width 3 ½”. This 24″ (h) x 13″ (w) aluminum metal handrail/grab bar is great for all types of outdoor marine applications. You can use it on your boat, dock, hot tub, pool and anywhere else you want a little extra support. This handrail is produced by marine fiberglass direct and is proudly made in the usa. Length 14 ½”. You can use stainless screws or stainless bolts for any type of application. You can use it around fresh water or salt water applications. Specs quantity one 24 inch handrail high quality 6063-t5 mill finish aluminum approximate height 24″ +/- 1 ½” diameter tube approximate center-line width 11. 5″. This handrail is designed to help with safety. Outside rail approximate width 13″. It allows safe and easy access to and from a boat or dock, making it perfect for all marinas, private docks, hot tubs, pools, fueling stations and many more places.
Hanjet 8′ x 10′ 5-mil Thick Camping Tarp Shelter Waterproof for Boat Pool Army Green
- 0254mm. 1. 2. Tarps can be used as protection for boats, cars or motor vehicles. Warning flammable. All edges are heat-sealed and reinforced with polyethylene rope. Reinforced, lightweight, reversible. 6. 5. 3. All full sizes, no “cut sizes”. Camping tarpaulin provides shelter for these elements, ie. . , Wind, rain or sunlight for campers, such as an emergency roof patch material for homeowners as a temporary pickup truck bed cover, and for a ground or drop sheet. 4. This product will ignite and burn if brought into contact with an open flame. Mil is the thickness of the material, one mil=0. Our tarps are made from a tight polyethylene weave which provides super durability.
36″ (H) x 13″ (W) Aluminum Handrail – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Proudly made by marine fiberglass direct in the usa. 36″ aluminum handrail. High quality 6063-t5 mill finish aluminum. You can use this around fresh water or salt water applications. Anchor pads will fit perfectly on a 2×4 on your dock or deck.
18″ (H) x 13″ (W) Aluminum Handrail w/ Flate Base Plate – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Base solid aluminum base plate width 3 ½”. This 18″ (h) x 13″ (w) aluminum metal handrail/grab bar is great for all types of outdoor marine applications. This handrail is made by marine fiberglass direct and it uses a solid aluminum base plate that is ¼” thick. Outside rail approximate width 13″. This handrail is produced by marine fiberglass direct and is proudly made in the usa. Thickness ¼” thick. Length 14 ½”. This handrail is designed to help with safety. You can use it on your boat, dock, hot tub, pool and anywhere else you want a little extra support. You can use this around fresh water or salt water applications. You can use stainless screws or stainless bolts for any type of application. 5″. It allows safe and easy access to and from a boat or dock, making it perfect for all marinas, private docks, hot tubs, pools, fueling stations and many more places. Specs quantity one 18 inch handrail high quality 6063-t5 mill finish aluminum approximate height 18″ +/- 1 ½” diameter tube approximate center-line width 11.
36″ (H) x 13″ (W) Aluminum Handrail w/ Flate Base Plate – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Specs quantity one 36 inch handrail high quality 6063-t5 mill finish aluminum approximate height 36″ +/- 1 ½” diameter tube approximate center-line width 11. This 36″ (h) x 13″ (w) aluminum metal handrail/grab bar is great for all types of outdoor marine applications. Thickness ¼” thick. You can use stainless screws or stainless bolts for any type of application. It allows safe and easy access to and from a boat or dock, making it perfect for all marinas, private docks, hot tubs, pools, fueling stations and many more places. Outside rail approximate width 13″. You can use it on your boat, dock, hot tub, pool and anywhere else you want a little extra support. Base solid aluminum base plate width 3 ½”. This handrail is produced by marine fiberglass direct and is proudly made in the usa. 5″. Length 14 ½”. This handrail is designed to help with safety. You can use it around fresh water or salt water applications. This handrail is made by marine fiberglass direct and it uses a solid aluminum base plate that is ¼” thick.
48″ (H) x 13″ (W) Aluminum Handrail – For 8″ Steps/Stairs – Safety Grab Bar – Dock, Boat, Pool, Hot Tub, etc.
- The 8″ cut off on one leg is perfect for stairs commonly found on docks, patios, or pools. This handrail is made by marine fiberglass direct and it uses two 3-1/2″ base plates that will fit on a 2×4 with no overlapping. Proudly made by marine fiberglass direct in the usa. You can use this around fresh water or salt water applications. 48″ aluminum handrail designed for steps.
2 (Two) 12″ (H) x 13″ (W) Aluminum Handrails – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Anchor pads will fit perfectly on a 2×4 on your dock or deck. Two 12″ aluminum handrails. Proudly made by marine fiberglass direct in the usa. High quality 6063-t5 mill finish aluminum. You can use this around fresh water or salt water applications.
36″ (H) x 13″ (W) Aluminum Handrail – For 8″ Steps/Stairs – Safety Grab Bar – Dock, Boat, Pool, Hot Tub, etc.
- Proudly made by marine fiberglass direct in the usa. This handrail is made by marine fiberglass direct and it uses two 3-1/2″ base plates that will fit on a 2×4 with no overlapping. 36″ aluminum handrail designed for steps. The 8″ cut off on one leg is perfect for stairs commonly found on docks, patios, or pools. You can use this around fresh water or salt water applications.
35″ (H) x 13″ (W) Aluminum Handrail – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- 35″ aluminum handrail. You can use this around fresh water or salt water applications. Anchor pads will fit perfectly on a 2×4 on your dock or deck. Proudly made by marine fiberglass direct in the usa. High quality 6063-t5 mill finish aluminum.
20′ x 20′ TARP Tarpaulin Canopy Tent Car RV Boat Pool Cover Reinforced 3 Layers
- Other features include, stronger than canvas, yet lighter~~, washable and reusable~~, water mildew & tear resistance~~, rope-reinforced corners & grommets ~~, 18″ distance between grommets~~, rustproof grommets~~, double reinforced corner for greater strength~~, tighter weave pattern for maximum weather protect ~~.
42″ (H) x 13″ (W) Aluminum Handrail w/ Flate Base Plate – Safety Grab Bar for Marine, Docks, Decks, Boats, Pools, Hot Tubs
- Specs quantity one 42 inch handrail high quality 6063-t5 mill finish aluminum approximate height 42″ +/- 1 ½” diameter tube approximate center-line width 11. You can use it on your boat, dock, hot tub, pool and anywhere else you want a little extra support. You can use it around fresh water or salt water applications. This handrail is made by marine fiberglass direct and it uses a solid aluminum base plate that is ¼” thick. You can use stainless screws or stainless bolts for any type of application. This handrail is designed to help with safety. Outside rail approximate width 13″. It allows safe and easy access to and from a boat or dock, making it perfect for all marinas, private docks, hot tubs, pools, fueling stations and many more places. Base solid aluminum base plate width 3 ½”. This handrail is produced by marine fiberglass direct and is proudly made in the usa. Thickness ¼” thick. Length 14 ½”. 5″. This 42″ (h) x 13″ (w) aluminum metal handrail/grab bar is great for all types of outdoor marine applications.
Swimline Fireboat Squirter Inflatable Pool Toy
- Built in squirt gun draws water from the pool so you never run out of water. Seating capacity 2 children. Measures 74-1/2-inchby 36-inch x 33-inch. Squirtgun uses water from the pool, no refilling. Made of heavy gauge pvc.
2 – Two 24" Aluminum Handrails – Safety Grab Bar For Marine, Docks, Decks, Boats, Pools, Hot Tubs
- You can use this around fresh water or salt water applications. Anchor pads will fit perfectly on a 2×4 on your dock or deck. Two 24″ aluminum handrails. High quality 6063-t5 mill finish aluminum. Proudly made in the usa.
24" Aluminum Handrail – Safety Grab Bar For Marine, Docks, Decks, Boats, Pools, Hot Tubs
- 24″ aluminum handrail. You can use this around fresh water or salt water applications. High quality 6063-t5 mill finish aluminum. Proudly made in the usa. Anchor pads will fit perfectly on a 2×4 on your dock or deck.
42″ (H) x 13″ (W) Aluminum Handrail – For 8″ Steps/Stairs – Safety Grab Bar – Dock, Boat, Pool, Hot Tub, etc.
- Proudly made by marine fiberglass direct in the usa. The 8″ cut off on one leg is perfect for stairs commonly found on docks, patios, or pools. 42″ aluminum handrail designed for steps. You can use this around fresh water or salt water applications. This handrail is made by marine fiberglass direct and it uses two 3-1/2″ base plates that will fit on a 2×4 with no overlapping.
